環境プラズマ研究室トピックス

大久保雅章 (Masaaki Okubo)のホームページ

Papers2

[2010]
  1. T. Kuroki, M. Ishidate, M. Okubo, and T. Yamamoto, Charge-to-mass Ratio and Dendrite Structure of Diesel Particulate Matter Charged by Corona Discharge, Carbon, Elsevier, Vol. 48, pp. 184-190 (2010.1).
  2. Y. Utsumi, S.Yamamoto, T. Kuroki, and M. Okubo, Direct Bonding of PTFE Sheets Assisted by Synchrotron Radiation Induced Surface Modification, Microsystem Technologies, Vol. 16, No. 8-9, pp. 1495-1500 (2010.2).
  3. T. Kuroki, K. Hirai, R. Kawabata, M. Okubo, and T. Yamamoto, Decomposition of Adsorbed Xylene on Adsorbent Using Nonthermal Plasma with Gas Circulation, IEEE Transactions on Industry Applications, Vol. 46, No. 2, pp. 672-679 (2010.3).
  4. H. Fujishima, T. Kuroki, T. Ito, K. Otsuka, T. Yamamoto, K. Yoshida, and M. Okubo, Performance Characteristics of Pilot-Scale Indirect Plasma and Chemical System Used for the Removal of NOx from Boiler Emission, IEEE Transactions on Industry Applications, Vol. 46, No. 5, pp. 1707-1714 (2010.9).
  5. H. Fujishima, A. Tatsumi, T. Kuroki, A. Tanaka, K. Otsuka, T. Yamamoto, and M. Okubo, Improvement in NOx Removal Performance of the Pilot-Scale Boiler Emission Control System Using an Indirect Plasma Chemical Process, IEEE Transactions on Industry Applications, Vol. 46, No. 5, pp. 1722-1729 (2010.9).
  6. M. Okubo, M. Tahara, Y. Aburatani, T. Kuroki, and T. Hibino, Preparation of PTFE Film with Adhesive Surface Treated by Atmospheric-Pressure Nonthermal Plasma Graft Polymerization, IEEE Transactions on Industry Applications, Vol. 46, No. 5, pp. 1715-1721 (2010.9).
  7. M. Okubo, T. Kuroki, K. Yoshida, and T. Yamamoto, Single-Stage Simultaneous Reduction of Diesel Particulate and NOx Using Oxygen-Lean Nonthermal Plasma Application, IEEE Transactions on Industry Applications, Vol. 46, No. 6, pp. 2143-2150 (2010.11).
  8. A. Mihalcioiu, K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, Design Factors for NOx Reduction in Nitrogen Plasma, IEEE Transactions on Industry Applications, Vol. 46, Vol. 6, pp. 2151-2156 (2010.11).
[2009]
  1. T. Kuroki, T. Fujioka, R. Kawabata M. Okubo, and T. Yamamoto, Regeneration of Honeycomb Zeolite by Nonthermal Plasma Desorption of Toluene, IEEE Transactions on Industry Applications, Vol. 45, No. 1, pp. 10-15 (2009.1).
  2. Y. Shimazaki, M. Okubo, T. Yamamoto, and A. Yoshida, Three-Dimensional Numerical Simulation of Nanoparticle Inhalation and Indoor Pollution around Breathing Human, Journal of Environment and Engineering, JSME Electric Journal, Vol. 4, No. 1, pp. 145-161 (2009.1).
  3. K. Yoshida, B. S. Rajanikanth, and M. Okubo, NOx Reduction and Desorption Studies under Electric Discharge Plasma in Simulated Gas Mixture: a Case Study on Effect of Corona Electrodes, Plasma Science and Technology, Institute of Physics and IOP Publishing Limited, Vol. 11, No. 3, pp. 327-333 (2009.6).
  4. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, NOx Reduction in Diesel Engine Emission Using Adsorption Followed by Nonthermal Plasma Process: Performances of Three Types of Plasma Reactors, International Journal of Emerging Multidisciplinary Fluid Sciences, Vol. 1, No. 3, pp. 201-211 (2009.9).
  5. G. Prieto, O. Prieto, C.R. Gay, K. Yoshida, T. Kuroki, M. Okubo, and T. Yamamoto, Plasma-Adsorption-Catalysis for the Toluene Destruction Process, International Journal of Plasma Environmental Science & Technology, Vol. 3, No. 2, pp. 107-115 (2009.9).
  6. M. Okubo, T. Kuroki, S. Kawasaki, K. Yoshida, and T. Yamamoto, Continuous Regeneration of Ceramic Particulate Filter in Stationary Diesel Engine by Nonthermal-Plasma-Induced Ozone Injection, IEEE Transactions on Industry Applications, Vol. 45, No. 5, pp. 1568-1574 (2009.9).
  7. K. Yoshida, T. Yamamoto, T. Kuroki, and M. Okubo, Pilot-Scale Experiment for Simultaneous Dioxin and NOx Removal from Garbage Incinerator Emissions Using the Pulse Corona Induced Plasma Chemical Process, Plasma Chemistry and Plasma Processing, Springer, Vol. 29, No. 5, pp. 373-386 (2009.10).
[2008]
  1. M. Okubo, N. Arita, T. Kuroki K. Yoshida, and T. Yamamoto, Total Diesel Emission Control Technology Using Ozone Injection and Plasma Desorption, Plasma Chemistry and Plasma Processing, Springer, Vol. 28, No. 2, pp. 173-187 (2008.4).
  2. K. Yoshida, T. Hibino, N. Saeki, and M. Okubo, Sterilization Device Using Corona Discharge Plasma Jet at Atmospheric Pressure, Journal of the Institute of Electrostatics Japan, Vol. 32, No. 2, pp. 90-91 (2008.4) (in Japanese).
  3. M. Okubo, N. Saeki, and T. Yamamoto, Development of Functional Sportswear for Controlling Moisture and Odor Prepared by Atmospheric Pressure Nonthermal Plasma Graft Polymerization Induced by RF Glow Discharge, Journal of Electrostatics, Elsevier, Vol. 66, No. 7-8, pp. 381-387 (2008.7).
  4. M. Okubo, M. Tahara, N. Saeki, and T. Yamamoto, Surface Modification of Fluorocarbon Polymer Films for Improved Adhesion Using Atmospheric-Pressure Nonthermal Plasma Graft-Polymerization, Thin Solid Films, Elsevier, Vol. 516, No. 19, pp. 6592-6597 (2008.8).
  5. M. Okubo, M. Tahara, T. Kuroki, T. Hibino, and N. Saeki, Plating Technology for Fluorocarbon Polymer Films Using Atmospheric-Pressure Nonthermal Plasma Graft Polymerization, Journal of Photopolymer Science and Technology, Vol. 21, No. 2, pp. 219-224 (2008.8).
  6. T. Kuroki, H. Fujishima, K. Otsuka, T. Ito, M. Okubo, T. Yamamoto, and K. Yoshida, Continuous Operation of Commercial-Scale Plasma-Chemical Aftertreatment System of Smoke Tube Boiler Emission with Oxidation Reduction Potential and pH Control, Thin Solid Films, Elsevier, Vol. 516, No. 19, pp. 6704-6709 (2008.8).
  7. M. Okubo, K. Yoshida, and T. Yamamoto, Numerical and Experimental Analysis of Nanosecond Pulse Dielectric Barrier Discharge-Induced Nonthermal Plasma for Pollution Control, IEEE Transactions on Industry Applications, Vol. 44, No. 5, pp. 1410-1417 (2008.9).
  8. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, NOx Aftertreatment Using Thermal Desorption and Nitrogen Nonthermal Plasma Reduction, IEEE Transactions on Industry Applications, Vol. 44, No. 5, pp. 1403-1409 (2008.9).
  9. T. Yamamoto, A. Kajimoto, M. Okubo, T. Kuroki, and K. Yoshida, PM and NOx Removal for Diesel Engine Emission Using Ozonizer and Chemical Hybrid Reactor, IEEE Transactions on Industry Applications, Vol. 44, No. 5, pp. 1431-1435 (2008.9).
[2007]
  1. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, Aftertreatment Technology of NOx in Diesel Exhaust Using Concentration by Adsorption and Plasma Reduction (Comparison of Plasma and Thermal Desorptions):Comparison of Plasma and Thermal Desorptions, Transactions of JSME, Vol. 73B, No.725, pp. 372-379 (2007.1) (in Japanese).
  2. Y. Shimazaki, M. Okubo, and T. Yamamoto, Three-dimensional Numerical Simulation of Gas-Particulate Flow around Breathing Human and Particulate Inhalation, Journal of Environment and Engineering, JSME Electric Journal, Vol. 2, No. 1, pp. 47-55 (2007.1).
  3. T. Kuroki, T. Fujioka, M. Okubo, and T. Yamamoto, Toluene Concentration Using Honeycomb Nonthermal Plasma Desorption, Thin Solid Films, Elsevier, Vol. 515, No. 9, pp. 4272-4277 (2007.3).
  4. M. Okubo, N. Arita, T. Kuroki, and T. Yamamoto, Carbon Particulate Matter Incineration in Diesel Engine Emissions Using Indirect Nonthermal Plasma Processing, Thin Solid Films, Elsevier, Vol. 515, No. 9, pp. 4289-4295 (2007.3).
  5. T. Yamamoto, G. Tanioka, M. Okubo, and T. Kuroki, Water Vapor Desorption and Adsorbent Regeneration for Air Conditioning Unit Using Pulsed Corona Plasma, Journal of Electrostatics, Elsevier, Vol. 65, No. 4, pp. 221-227 (2007.4).
  6. K. Yoshida, M. Okubo, and T. Yamamoto, Distinction between Nonthermal Plasma and Thermal Desorptions for NOx and CO2, Applied Physics Letters, Vol. 90, 131501 (2007.5).
  7. T. Kuroki, S. Tanaka, M. Okubo, and T. Yamamoto, Numerical Investigation for CF4 Decomposition Using RF Low Pressure Plasma, IEEE Transactions on Industry Applications, Vol. 43, No. 4, pp. 1075-1083 (2007.7).
  8. M. Okubo, H. Kametaka, K. Yoshida, and T. Yamamoto, Odor Removal Characteristics of Barrier-Type Packed-Bed Nonthermal Plasma Reactor, Japanese Journal of Applied Physics, Vol. 46, No. 8A, pp. 5288-5293 (2007.8).
  9. T. Yamamoto, M. Okubo, T. Kuroki, and K. Yoshida, Pilot-Plant Experiment for Incinerator Emission Control Using Plasma-Chemical Hybrid Process (Simultaneous Removal of NO. and Gas-Phase Dioxins), Transactions of JSME, Vol. 73B, No. 732, pp. 1767-1774 (2007.8) (in Japanese).
[2006]
  1. M. Okubo, N. Saeki, T. Taguchi, and T. Yamamoto, Development of Surface Treatment Apparatus for Manufacturing Functional Wear Using Low-Temperature Plasma, Transactions of JSME, Vol. 72A, No. 714, pp. 263-268 (2006.2) (in Japanese).
  2. H. Fujishima, Y. Morita, M. Okubo, and T. Yamamoto, Numerical Simulation of Three-dimensional Electrohydrodynamics of Spiked-electrode Electrostatic Precipitators, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 13, No. 1, pp. 160-167 (2006.2).
  3. T. Kuroki, K. Yoshida, H. Watanabe, M. Okubo, and T. Yamamoto, Decomposition of Trace Phenol in Solution Using Gas-Liquid Interface Discharge, Japanese Journal of Applied Physics, Part 1, Vol. 45, No. 5A, pp. 4296-4300 (2006.5).
  4. T. Yamamoto, Y. Morita, H. Fujishima, and M. Okubo, Three-dimensional EHD Simulation for Point Corona Electrostatic Precipitator Based on Laminar and Turbulent Models, Journal of Electrostatics, Elsevier, Vol. 64, No. 7-9, pp. 628-633 (2006.7).
  5. M. Okubo, T. Kuroki, K. Kitaura, and T. Yamamoto, Diesel Engine Emission Control Using Pulsed Corona Plasma-Wet Chemical Hybrid Process, Journal of Environment and Engineering, JSME Electric Journal, Vol. 1, No. 1, pp. 29-38 (2006.12).
  6. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, NOx Reduction and Regeneration of Adsorbent Using N2 Nonthermal Plasma, Journal of the Institute of Electrostatics Japan, Vol. 30, No. 6, pp. 284-290 (2006.12) (in Japanese).
[2005]
  1. T. Kuroki, J. Mine, M. Okubo, T. Yamamoto, and N. Saeki, CF4 Decomposition Using Inductivity Coupled Plasma (Effect of Power Frequency), IEEE Transactions on Industry Applications, Vol. 41, No.1, pp. 215-220 (2005.1).
  2. T. Kuroki, J. Mine, S. Odahara, M. Okubo, T. Yamamoto, and N. Saeki, CF4 Decomposition of Flue Gas from Semiconductor Process Using Inductively Coupled Plasma, IEEE Transactions on Industry Applications, Vol. 41, No. 1, pp. 221-228 (2005.1).
  3. M. Okubo, M. Inoue, T. Kuroki, and T. Yamamoto, NOx Reduction Aftertreatment System Using Nitrogen Nonthermal Plasma Desorption, IEEE Transactions on Industry Applications, Vol. 41, No. 4, pp. 891-899 (2005.7).
  4. T. Kuroki, S. Tanaka, M. Okubo, and T. Yamamoto, CF4 Decomposition Using Low-Pressure Pulse-Modulated Radio Frequency Plasma, JSME International Journal, Series B, Special Issue on Advanced Fusion of Functional Fluids Engineering, Vol. 48, No. 3, pp. 440-447 (2005.8).
  5. T. Yamamoto, M. Ryo, S. Odawara, R. Yasuda, M. Okubo, and T. Kuroki, Simulation of Human Virus Infection Accompanied by Inhalation, Transactions of JSME, Vol 71B, No. 708, pp. 1965-1970 (2005.8) (in Japanese).
  6. H. Fujishima, T. Haruna, T. Kuroki, M. Okubo, and T. Yamamoto, NOx Removal Using Indriect Plasma Oxidation and Chemical Hybrid Process (Comparison of Air Radical Injection with Direct Oxidation):Comparison of Air Radical Injection with Direct Oxidation, Transactions of JSME, Vol. 71B, No. 711, pp. 2816-2822 (2005.11) (in Japanese).
[2004]
  1. T. Yamamoto, A. Yoshizaki, T. Kuroki, and M. Okubo, Dry Aluminum Surface Treatment Using Nonthermal Plasma Process, Journal of the Institute of Electrostatics Japan, Vol. 28, No. 1, pp. 53-58 (2004.2) (in Japanese).
  2. H. Fujishima, T. Kuroki, M. Okubo, and T. Yamamoto, Simultaneous NOx, SOx and Diesel Particulate Removal Using Single-Stage Wet-Type Plasma and Chemical Hybrid Process, Transactions of JSME, Vol. 70B, No. 691, pp. 817-822 (2004.3) (in Japanese).
  3. T. Yamamoto, M. Okubo, N. Imai, and Y. Mori, Improvement on Hydrophilic and Hydrophobic Properties of Glass Surface Treated by Nonthermal Plasma Induced by Silent Corona Discharge, Plasma Chemistry and Plasma Processing, Springer, Vol. 24, No. 1, pp. 1-12 (2004.3).
  4. T. Kuroki, N. Saeki, M. Okubo, and T. Yamamoto, Decomposition of CF4 Exhaust Gas from Semiconductor Manufacturing Equipments Using Low Pressure Inductively Coupled Plasma (Optimization of Operating Conditions and Byproduct Analysis) Transactions of JSME, Vol. 70B, No. 692, pp. 1058-1063 (2004.4) (in Japanese).
  5. T. Yamamoto, C-L. Yang, T. Nagaoka, M. Okubo, T. Kuroki, and M. Okamoto, Electrochemical Methods for Coolant Oil Regeneration, Filtration, The Filtration Society, UK, Vol. 4, No. 2, pp. 109-113 (2004.9).
  6. T. Yamamoto, A. Yoshizaki, T. Kuroki, and M. Okubo, Aluminum Surface Treatment Using Three Different Plasma-Assisted Dry Chemical Processes, IEEE Transactions on Industry Applications, Vol. 40, No. 5, pp. 1220-1225 (2004.9).
  7. M. Okubo, T. Miyashita, T. Kuroki, S. Miwa, and T. Yamamoto, Regeneration of Diesel Particulate Filter Using Nonthermal Plasma without Catalyst, IEEE Transactions on Industry Applications, Vol. 40, No. 6, pp. 1451-1458 (2004.11).
  8. M. Okubo, T. Kuroki, Y. Miyairi, and T. Yamamoto, Low Temperature Soot Incineration of Diesel Particulate Filter Using Remote Nonthermal Plasma Induced by a Pulsed Barrier Discharge, IEEE Transactions on Industry Applications, Vol. 40, No. 6, pp. 1504-1512 (2004.11).
[2003]
  1. M. Okubo, T. Kuroki, T. Yamamoto, and S. Miwa, Soot Incineration of Diesel Particulate Filter Using Honeycomb Nonthermal Plasma, SAE Transactions, Journal of Fuels and Lubricants, No.2003-01-1886, pp. 1561-1567 (2003.5).
  2. T. Yamamoto, T. Kuroki, M. Okubo, and K. Hayakawa, Simultaneous DeNOx and DeSOx Technology Using Non-Equilibrium Plasma and Chemical Hybrid Process, Transactions of JSME, Vol. 69B, No. 685, pp. 2167-2172 (2003.9) (in Japanese).
  3. T. Yamamoto, M. Okuda, and M. Okubo, Three-Dimensional Ionic Wind and Electrohydrodynamics of Tuft/Point Corona Electrostatic Precipitator, IEEE Transactions on Industry Applications, Vol. 39, No. 6, pp. 1602-1607 (2003.11).
  4. T. Yamamoto, B. S. Rajanikanth, M. Okubo, T. Kuroki, and M. Nishino, Performance Evaluation of Nonthermal Plasma Reactors for NO Oxidation in Diesel Engine Exhaust Gas Treatment, IEEE Transactions on Industry Applications, Vol. 39, No. 6, pp. 1608-1613 (2003.11).
  5. M. Okubo, S. Miwa, T. Kuroki, and T. Yamamoto, Low Temperature Soot Incineration of Diesel Particulate Filter Using Honeycomb Nonthermal Plasma, Transactions of JSME, Vol. 69B, No. 688, pp. 2719-2724 (2003.12) (in Japanese).
[2002]
  1. M. Okubo, G. Tanioka, T. Kuroki, and T. Yamamoto, NOx Concentration Using Adsorption and Nonthermal Plasma Desorption, IEEE Transactions on Industry Applications, Vol. 38, No. 5, pp. 1196-1203 (2002.9).
  2. T. Yamamoto, M. Okubo, T. Nagaoka, and K. Hayakawa, Simultaneous Removal of NOx, SOx, and CO2 at Elevated Temperature Using a Plasma-Chemical Hybrid Process, IEEE Transactions on Industry Applications, Vol. 38, No. 5, pp. 1168-1173 (2002.9).
  3. T. Kuroki, M. Takahashi, M. Okubo, and T. Yamamoto, Single-Stage Plasma-Chemical Process for Particulates, NOx and SOx Simultaneous Removal, IEEE Transactions on Industry Applications, Vol. 38, No. 5, pp. 1204-1209 (2002.9).
  4. M. Okubo, M. Hata, T. Kuroki, and T. Yamamoto, Effect of Magnetic Field on NOx Removal using Nonequilibrium Plasma, Journal of the Institute of Electrostatics Japan, Vol. 26, No. 5, pp. 215-219 (2002.10) (in Japanese).
[2001]
  1. T. Yamamoto, M. Okubo, N. Imai, Y. Matsumoto, and Y. Mori, Improvement of Hydrophobic and Hydrophilic Properties of Glass Surface Using Nonthermal Plasma, Journal of the Institute of Electrostatics Japan, Vol. 25, No. 2, pp. 105-106 (2001.4) (in Japanese).
  2. T. Kuroki, M. Okubo, and T. Yamamoto, Indoor Air Cleaning Technology Using Non-Equilibrium Plasma (Odor Removal in Cigarette smoke), Transactions of JSME, Vol. 67B, No. 658, pp1481-1486 (2001.6) (in Japanese).
  3. M. Okubo, T. Kuroki, H. Kametaka, and T. Yamamoto, Odor Control using the AC Barrier Type Plasma Reactors, IEEE Transactions on Industry Applications, Vol. 37, No. 5, Sep./Oct., pp. 1447-1455 (2001.9).
  4. T. Yamamoto, M. Okubo, K. Hayakawa, and K. Kitaura, Towards Ideal NOx Control Technology Using a Plasma-Chemical Hybrid Process, IEEE Transactions on Industry Applications, Vol. 37, No. 5, Sep./Oct., pp. 1492-1498 (2001.9).
  5. M. Okubo, T. Yamamoto, T. Kuroki, and H. Fukumoto, Electric Air Cleaner Composed of Non-Thermal Plasma Reactor and Electrostatic Precipitator, IEEE Transactions on Industry Applications, Vol. 37, No. 5, Sep./Oct., pp. 1505-1511 (2001.9).
  6. T. Yamamoto, M. Okubo, T. Miyashita, and K. Kitaura, NOx Removal in Diesel Engine Exhaust Using Nonequilibrium Plasma and Chemical Process, Transactions of JSME, Vol. 67B, No. 663, pp. 2891-2897 (2001.11) (in Japanese).
  7. M. Okubo, T. Yamamoto, T. Kuroki, J. Mine, N. Saeki, and S. Kataoka, Control and Moisture Breath of Functional Cloth Prepared by Plasma-Graft Polymerization, Journal of the Institute of Electrostatics Japan, Vol. 25, No. 6, pp. 328-329 (2001.12) (in Japanese).
[2000]
  1. T. Yamamoto, M. Okubo, T. Kuroki, and Y. Yamamoto, Nonthermal Plasma Desorption for NOx Control, Transactions of the Institute of Fluid-Flow Machinery, No. 107, pp. 111-120 (2000.1).
  2. J. Mai, M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Instability of Magnetic Fluid Surface under Horizontal Non-uniform Alternating Magnetic Field, Transactions of JSME, Vol. 66B, No. 642, pp. 398-405 (2000.2) (in Japanese).
  3. J. Mai, M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Waves on Magnetic Fluid Surface Excited by Horizontal Non-Uniform Alternating Magnetic Field, Transactions of JSME, Vol. 66B, No. 642, pp. 406-414 (2000.2) (in Japanese).
  4. T. Kuroki, M. Okubo, H. Fukumoto, and T. Yamamoto, Development of New Electric Air Cleaner for Controlling Particulates and Odors, Journal of Aerosol Research, Vol. 15, No. 2, pp. 116-123 (2000.6) (in Japanese).
  5. T. Yamamoto, M. Okubo, K. Hayakawa, and K. Kitaura, Complete NOx Removal Technology Using Nonequilibrium Plasma and Chemical Process (Performances of Ordinary and Barrier Type Plasma Reactors), Transactions of JSME, Vol. 66B, No. 646, pp. 1501-1506 (2000.6) (in Japanese).
  6. T. Yamamoto, M. Okubo, and M. Fujimoto, Desorption and Regeneration of NO Using Non-equilibrium Plasma, Journal of the Institute of Electrostatics Japan, Vol. 24, No. 3, pp. 161-162 (2000.6) (in Japanese).
  7. T. Yamamoto, M. Okubo, K. Hayakawa, and K. Kitaura, Complete NOx Removal Using Nonthermal Plasma and Chemical Processes, Journal of the Institute of Electrostatics Japan, Vol. 24, No. 4, pp. 208-212 (2000.8) (in Japanese).
[1999]
  1. L. Kushida, M. Okubo, D. Biswas, and H. Yamasaki, Three-Dimensional Numerical Simulation on Supersonic Flow and Total Pressure Loss in Disk Channel, Transactions of JSME, Vol. 65B, No. 634, pp. 1899-1906 (1999.6) (in Japanese).
  2. Y. Okuno, T. Okamura, K. Yoshikawa, T. Suekane, K. Tsuji, M. Okubo, T. Maeda, T. Murakami, H. Yamasaki, S. Kabashima, S. Shioda, and Y. Hasegawa, High Enthalpy Extraction Experiments with Fuji-1 MHD Blow-down Facility, Energy Conversion & Management, Vol. 40, pp. 1177-1190 (1999.7).
  3. R. Hanaoka, M. Takata, M. Suzuki, K. Wada, K. Chikamura, N. Yamaguchi, J. Masuda, M. Okubo, and H. Yamasaki, Effects of Area Ratio on Performances of Disk MHD Generator with Argon, Trans. IEE of Japan, Vol. 118B, No. 7/8, pp. 866-873 (1998.7) (in Japanese).
  4. M. Okubo, Y. Okuno, S. Kabashima, and H. Yamasaki, Numerical Simulation of Discharge Structure in Ar/Cs Plasma Disk MHD Generator, Transactions of IEE of Japan, Vol. 119B, No. 7, pp. 820-827 (1999.7) (in Japanese).
[1997]
  1. M. Okubo and H. Yamasaki, Numerical Prediction on Performance of Disk Plasma MHD Generator, Trans. of IEE of Japan, Vol. 117B, No. 1, pp. 122-129 (1997.1) (in Japanese).
  2. M. Takata, Y. Nagasaki, K. Hayakawa, M. Okubo, and H. Yamasaki, Effects of Load Connection on Performance of Disk MHD Generator, Trans. IEE of Japan, Vol. 117B, No. 9, pp. 1282-1287 (1997.9) (in Japanese).
  3. M. Takata, Y. Nagasaki, K. Hayakawa, M. Okubo, and H. Yamasaki, Magneto-Acoustic Instability in Disk CCMHD Generator, Trans. IEE of Japan, Vol. 117B, No. 12, pp. 1584-1592 (1997.12) (in Japanese).
[1996]
  1. J. Ishimoto, M. Okubo, and S. Kamiyama, Study on Stability of Boiling Two-Phase of Magnetic Fluid, Transactions of JSME, Vol. 62B, No. 595, pp. 903-912 (1996.3) (in Japanese).
[1995]
  1. J. Ishimoto, M. Okubo, and S. Kamiyama, Basic Study on an Energy Conversion System Using Boiling Two-Phase Flows of Temperature-Sensitive Magnetic Fluid (Theoretical Analysis Based on Thermal Nonequilibrium Model and Flow Visualization Using Ultrasonic Echo), Transactions of JSME, Vol. 61B, No. 581, pp. 157-165 (1995.1) (in Japanese).
  2. K. Tsuji, Y. Niwa, T. Kaneko, M. Okubo, and H. Yamasaki, Characteristics of Flow and Plasma under High MHD Interaction in Nonequilibrium Disk MHD Generator Using Argon, Trans. IEE of Japan, Vol. 115B, No. 2, pp. 164-171 (1995.2) (in Japanese).
  3. S. Kamiyama, M. Okubo, J. Ishimoto, and M. Higashitani, Bubble Behaviour in a Magnetic Fluid under a Nonuniform Magnetic Field, JSME Int. Journal, Ser.B, Vol. 38, No. 3, pp. 382-387 (1995.8).
[1994]
  1. M. Okubo, J. Ishimoto, H. Nishiyama, and S. Kamiyama, Analytical Study on Two-phase MHD Flow of Electrically Conducting Magnetic Fluid, Magnethydrodynamics (Translated from Russian Journal, Magnitnaja Gidrodinamika), Vol. 29, No.3, pp. 291-297 (1994.1).
  2. J. Ishimoto, M. Okubo, and S. Kamiyama, Study of the MHD Power-Generation System Using Two-phase Flows of Temperature-Sensitive Electrically Conducting Magnetic Fluids (Analysis of Flow Characteristics in a Pipe and the Power-Generation Characteristics), Transactions of JSME, Vol. 60B, No. 571, pp. 891-898 (1994.3) (in Japanese).
  3. Y. Shimokawa, M. Okubo, K. Hayashi, and S. Kamiyama, Basic Study of Non-Contacting Support of Thin Plate by Fluid Cushion Force, Transactions of JSME, Vol. 60B, No. 572. pp. 1176-1181 (1994.4) (in Japanese).
  4. Y. Shimokawa, M. Okubo, and S. Kamiyama, Basic Study on Non-Contacting Support of Thin Plate by Fluid Cushion Force, Transactions of JSME, Vol. 60B, No. 575, pp. 2425-2430 (1994.7) (in Japanese).
[1993]
  1. M. Okubo, Y. Katsumura, S. Oshima, S. Kamiyama, and R. Yamane, Local Velocity Measurement of Magnetic Fluid Flow Using Laser Optical Fiber Sensor, Journal of Magnetisum and Magnetic Materials, Vol. 122, No.1-3, pp. 200-203 (1993.4).
  2. M. Okubo, Y. Katumura, S. Oshima, S. Kamiyama, and R. Yamane, Open Channel Flows of Magnetic Fluid Induced by Traveling Magnetic Field, Transactions of JSME, Vol. 59B, No. 562, pp. 1777-1784 (1993.6) (in Japanese).
  3. H. Nishiyama, T. Saisu, M. Okubo, and S. Kamiyama, Numerical Simulation of a Non-equilibrium Plasma Jet in the Applied Magnetic Field, Transactions of JSME, Vol. 59B, No. 562, pp. 1854-1862 (1993.6) (in Japanese).
  4. S. Nam, M. Okubo, H. Nishiyama, and S. Kamiyama, Numerical Analysis of Heat Transfer and Fluid Flow on High-Temperature Jet Including Particles in Plasma Spraying, Transactions of JSME, Vol. 59B, No.563, pp. 2135-2141 (1993.7) (in Japanese).
  5. J. Ishimoto, M. Okubo, H. Nishiyama, and S. Kamiyama, Basic Study on an Energy Conversion System Using Gas-liquid Two-phase Flows of Magnetic Fluid (Analysis on the Mechanism of Pressure Rise), Transactions of JSME, Vol. 59B, No. 566, pp. 3071-3077 (1993.10) (in Japanese).
[1992]
  1. H. Nishiyama, M. Okubo, T. Miyadera, and S. Kamiyama, Numerical Analysis of Heat Transfer and Fluid Flow in Plasma Spraying, Transactions of JSME, Vol. 58B, No. 547, pp. 736-742 (1992.3) (in Japanese).
  2. S. Kamiyama, M. Okubo, and F. Fujisawa, Recent Development of Technology in Magnetic Fluid Experiment, Experimental Thermal and Fluid Science, Vol. 5, pp. 641-651 (1992.5).
[1991]
  1. M. Okubo, H. Endo, Y. Ishibashi, S. Oshima, and R. Yamane, Local Velocity Measurement of Magnetic Fluid Flow Using Semiconductor Laser and Optical Fiber, Transactions of JSME, Vol. 57B, No. 541, pp. 3278-3284 (1991.9) (in Japanese).
[1990]
  1. M. Okubo, Y. Ishibashi, S. Oshima, H. Katakura, and R. Yamane, Interfacial Waves of the Magnetic Fluid in Vertical Alternating Magnetic Fields, Journal of Magnetism and Magnetic Materials, Vol. 85, No. 1-3, pp. 163-166 (1990.4).
[1989]
  1. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Magnetic Fluid Flows in a Traveling Magnetic Field (Analysis on Flow in Channel), JSME Int. Journal, Series 2, Vol. 32, No. 1, pp. 39-46, (1989.2).
  2. M. Okubo, H. Ozaki, Y. Ishibashi, S. Oshima, and R. Yamane, Measurement of Magnetic Fluid Flows Using Laser Optical Fibers, J. of the Japan Society of Powder and Powder Metallurgy, Vol. 36, No. 6, pp. 770-773 (1989.8) (in Japanese).
  3. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Interfacial Instability of Magnetic Fluid in Alternating Magnetic Field, Transactions of JSME, Vol. 55B, No. 518, pp. 2968-2976 (1989.10) (in Japanese).
  4. M. Okubo, Y. Ishibashi, S. Oshima, H. Katakura, and R. Yamane, Interfacial Instability of Magnetic Fluid in Alternating Magnetic Field (2nd Report, Experiment on Surface Instability Curves), Transactions of JSME, Vol. 55B, No. 520, pp. 3703-3708 (1989.12) (in Japanese).
  5. M. Okubo, Y. Ishibashi, S. Oshima, H. Katakura, and R. Yamane, Interfacial Instability of Magnetic Fluid in Alternating Magnetic Field (3rd Report, Linear Stability Analysis of Viscous Flow), Transactions of JSME, Vol. 55B, No. 520, pp. 3709-3715 (1989.12) (in Japanese).
[1988]
  1. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Magnetic Fluid Flows in a Rotating Magnetic Field (1st Report, Experiments on Shape of Free Surface and Circulation Velocity), Transactions of JSME, Vol. 54B, No. 505, pp. 2383-2389 (1988.9) (in Japanese).
  2. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Magnetic Fluid Flows in a Rotating Magnetic Field (2nd Report, Analyses on Shape of Free Surface and Circulation Velocity), Transactions of JSME, Vol. 54B, No. 505, pp. 2390-2398 (1988.9) (in Japanese).
  3. M. Okubo, R. Yamane, and S. Oshima, Coherent Structure in the Turbulent Wake behind a Circular Cylinder (2. Numerical Simulation Using the Vortex Filament Model), Fluid Dynamics Research, Vol. 4, pp. 39-46 (1988.12).
  4. R. Yamane, S. Oshima, M. Okubo, and J. Kotani, Coherent Structure in the Turbulent Wake behind a Circular Cylinder, (3. Flow Visualization and Hot Wire Measurements), Fluid Dynamics Research, Vol. 4, pp. 47-56 (1988.12).